Products
Room Alert 3 Wi-Fi
The Room Alert 3 Wi-Fi is AVTECH’s economical Wi-Fi-enabled environment monitor. This model installs easily in areas with no Ethernet connection. It monitors temperature, plus up to 2 more environment conditions of your choice.
When conditions exceed your thresholds, Room Alert notifies you right away so you can act quickly.
Send email and text messages right from the device.
Pair with RoomAlert.com (or other compatible platforms) for even more alerting capabilities.
- Send email and text messages right from the device.
- Trigger the warning LEDs and siren sound on a Light Tower.
- Pair with RoomAlert.com (or other compatible platforms) for even more alerting capabilities.
The Room Alert 3 Wi-Fi connects to your network only via Wi-Fi — it does not have an Ethernet port. Need a model that connects via Ethernet cable? Consider the Room Alert 3E.
$373.00 exc. GST
Room Alert 3 Wi-Fi Description
AVTECH’s Room Alert 3W is our low-cost, Wi-Fi-enabled environment monitor that expands your reach into areas with no Ethernet connection. It monitors your facility for temperature and up to two more environment conditions of your choice.
Small and light, the Room Alert 3 Wi-Fi can hang from a ceiling or on a wall with no special tools. It goes where it would be impractical to put our wired models, such as basements and attics. While it fits easily where space it at a premium, multiples of this unit can also be distributed across strategic locations of larger spaces to cover more ground.
Use Room Alert 32S on its own or pair it with these powerful platforms!
– RoomAlert.com
– Room Alert Manager
– 3rd-party SNMP or JSON
Trigger alerts, reminders and “all-clears” in response to environmental thresholds that you set.
Receive alerts in the best format for you!
– Text message
– Visual/audible signal
– HTTP post
– SNMP trap
View sensor readings on an easy-to-read web interface—over the Internet or on your local network.
Compile, graph and download historical sensor data to spot trends in your environment.
Power Room Alert by PoE or with included 5V power adapter.
Specifications
Room Alert 3 Wi-Fi Specifications
| Feature | Description | |
| Internal temperature sensor | Condition monitored | Indoor ambient temperature |
| Type | Digital | |
| Range | -40 to 185 F (-40 to 85 C) | |
| Accuracy | +/- 2° C | |
| Resolution | 0.03125° C | |
| Readings | Numeric values in Fahrenheit or Celsius | |
| Feature | Description | |
| External sensor & accessory ports | 1 digital sensor port (RJ-11) | |
| 1 switch sensor port (push button terminal block) | ||
| Feature | Description | |
| Wi-Fi Connectivity | WLAN Interface | IEEE 802.11 b/g IEEE 802.11n (single stream, 2.4 GHz only) IEEE 802.11 d/h/i |
| Security | WEP (Client Only) WPA Personal WPA2 Personal |
|
| Feature | Description | |
| Power port | 1 5V barrel-connector power jack | |
| Feature | Description | |
| Power supply | AVTECH 5V power adapter (100/240 VAC, 50/60 Hz, RoHS) | |
| Feature | Description | |
| Dimensions | Height | 0.875″ |
| Depth | 3.625″ | |
| Width | 1.75″ | |
| Feature | Description | |
| Weight | 0.1 lbs | |
| Feature | Description | |
| Operating tolerances | Temperature | -40 to 185 F (-40 to 85 C) |
| Humidity | 5% – 85% RH, non-condensing Do not place Room Alert monitors inside refrigerators/freezers—these are condensing environments. |
|
Compatible Products
Room Alert 3 Wi-Fi Compatible Products
Compatible monitoring platforms
You may access your Room Alert 3 Wi-Fi through the compatible platforms below. For more information, please see our FAQ, The Differences Between Room Alert Monitoring Platforms.
| Room Alert’s built-in web interface | 
|
| RoomAlert.com Account |
|
| Room Alert Link software |
|
| Room Alert Manager software Replaces Device ManageR. |
|
| Device ManageR software |
|
| Device Discovery utility |
|
| 3rd-party off-the-shelf SNMP program | 
|
| 3rd-party custom HTTP/JSON application |
|
The Room Alert 3 Wi-Fi is not SNMP-compatible.
Compatible sensors & accessories
| Room Alert’s built-in web interface | Matching ports on this model | |
| Any AVTECH digital sensor | Built-in | 1 digital ports |
| Any AVTECH switch sensor Any 3rd-party device with open/closed dry contacts |
Built-in | 1 switch ports |
| Any AVTECH analog sensor Any 3rd-party analog sensor that outputs 1 to 5 VDC |
External | Add 1 analog port. Here’s how: Put a Digital Temperature & Analog Sensor in your device’s built-in digital port. |
Compatible power adapters
Always use an AVTECH 5V power adapter with your Room Alert. Others will void your warranty and may damage your unit.
| AVTECH’s 5V standard power adapter (USA, Canada, Japan) |
| AVTECH’s 5V international power adapter |
| AVTECH’s 5V C14 power adapter |